In between working on another large scale piece, I took a moment to create another woven piece using an old cassette tape. The first piece and my process is documented here. The colors of this piece reminds me of Life Savers candies.
This time I decided to use fusible web on the back instead of a piece of muslin. The paper will stay on the back until I decide my step. I used more warps to add interest. Also, the piece is a bit more symmetrical than the first piece. I'm not sure if I have a series developing or just a fun project to break up the time while working on large scale pieces that I can't blog about yet.
In between working on a large (30"x 50") piece for a group exhibit, I decided to try a woven (wild hair) idea that has been brewing in my head. The idea started because I'm interested in creating more woven pieces along with using nontraditional materials. I came across some old cassette tapes (remember them?) and decided to incorporate them in a woven piece.
I needed a base to attached the material while I was weaving the piece. I have a piece of insulation form board that fit the bill. I made some registration marks first to mark where I was going to put the cassette tape. The finished size was marked as 7"x 13 1/2". The cassette tape was used as the warp (length). Leftover pieces of fabric with fusible web on the back was used as the weft (width). The fusible fabric solved the issue of how to keep the weaving together.
Before I started weaving, a small piece of muslin was set on top of the insulation board. The muslin was used a the base that the woven piece will be fused. After all the prep was done, I started by pinning the cassette tape with small sewing pins. I soon found out that the pins wouldn't hold the cassette tape. Second attempt, I tried blue painters tape. Success!
Then on to weaving the fusible fabric in to a pattern. Sewing pins were used to hold the fabric strips in place.
Once all the fabric was in place, I lightly ironed on top. I used a piece of scrap fabric because I was concerned the iron might melt the cassette tape.
Then trimmed the piece.
Not bad for my first attempt. Here are some things that I learned:
1. Use a color fabric as the base other than white muslin to avoid having it show through.
3. Or substitute parchment paper instead of base fabric. Not having a piece of fabric on the back may give me more flexibility when mounting this artwork or incorporating it with other artwork.
2. Make sure the fabric is cut accurately. As I was trimming the piece, I found it was lopsided. Oops!
3. Next time I will add more warps or use wider material such as reel to reel tapes.
